Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Fireplace Repair in Alpharetta: What to Know First
Olympia Chimney fireplace repair in Alpharetta usually takes one visit, and most jobs run between $180 and $650 depending on what’s failed. We’re an independent Olympia Chimney service provider, not a manufacturer affiliate, and we work on their wood-burning and gas fireplace systems throughout Alpharetta, Milton, and Roswell. If you’re noticing a pilot light that won’t stay lit, a damper that sticks, or a firebox with cracked panels, call us at (762) 225-2593 and we’ll give you a straight read on what’s going on. This page is for Alpharetta homeowners who own an Olympia Chimney fireplace and want someone who actually knows how these units age.
How Olympia Chimney Products Fail – and How We Fix Them
Olympia Chimney builds solid fireplaces, but every product line has its habits. After years of servicing these units across Alpharetta, here’s what we see most often and what we do about it.
- Ventis gas fireplace pilot light dropout. The Ventis line runs a millivolt pilot assembly that gets finicky as thermopile voltage drops. We test the thermopile output before replacing anything. If it’s below 250 millivolts under load, we swap in a new OEM-spec pilot assembly rather than just cleaning the old one, which tends to fail again within a season.
- Olympia wood-burning firebox refractory panel cracking. The refractory panels in Olympia’s masonry-style fireboxes absorb heat and moisture over time. In Alpharetta’s humid summers, that moisture expands and contracts, leading to hairline cracks that eventually open up. We replace these with factory-dimension panels and seal the joints properly so the crack doesn’t just migrate.
- Damper warping on older Olympia steel fireplaces. We see this a lot in Windward homes near Lake Windward where fireplaces were built in the 1990s and used heavily. The damper plate and frame warp from cycling heat, and then the damper won’t seat fully. That kills your draft and sends a faint smoke smell into the room. We straighten or replace the damper assembly, and we check the linkage so it actually closes tight when you’re done burning.
- Gas log set and burner issues on Olympia’s gas inserts. The ceramic fiber logs in many Olympia gas inserts develop surface cracking from repeated heating. What looks like a failure is often just cosmetic, and we’ll tell you that honestly. The real issue is usually the burner ports clogging with dust and pet hair, which we clean methodically at low pressure so we don’t damage the ports.
- Chase cover rust-through on Olympia prefab installations. This is the Alpharetta climate reality: the galvanized chase covers on exterior Olympia chimney chases slowly rust from the top down. Once water gets in, it drips onto the firebox and accelerates every other problem. We fabricate replacement covers in stainless steel so you don’t replace a galvanized part with another galvanized part that rusts again.
Styles & brands we work with





Our Olympia Chimney Fireplace Repair Process
Here’s exactly what happens when you call us for Olympia Chimney fireplace repair in Alpharetta, from the first phone call to the clean-up photo.
- 1
You call (762) 225-2593. A live person answers, every time. No voicemail tree. You tell us what the fireplace is doing, and we schedule a visit that works for your family.
- 2
We arrive and protect your home first. Shoe covers go on at the door, drop cloths go down around the hearth, and we ask before moving anything. This is the Cedarwell Care Promise and it’s not optional for our crew.
- 3
We diagnose the Olympia unit properly. We don’t guess. We test the gas pressure, pilot assembly, thermopile, damper function, and firebox condition. You’ll know what’s wrong before we touch a tool.
- 4
You get a written price before work starts. No on-the-spot pressure. We show you what we found, what we recommend, and exactly what it costs. You decide.
- 5
We repair using the right parts. OEM Olympia parts where it matters for safety and fit. Quality aftermarket parts from trusted brands where OEM isn’t available or the cost doesn’t justify it. We explain which we’re using and why.
- 6
We test, we show you, we clean up. We run the fireplace through a full cycle before we pack up. Then we take a photo of the clean-up and walk you through everything we did. The 365-Day Done Right Promise means if it’s not right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Fireplace Repair Costs in Alpharetta
Honest numbers, because families shouldn’t be surprised at the door. Most standard Olympia Chimney fireplace repairs in Alpharetta run between $180 and $650. The spread depends on what’s actually wrong, and we’ll tell you if a problem can safely wait.
- Pilot light repair or thermopile replacement: $180 to $320
- Firebox refractory panel replacement: $350 to $650
- Damper repair or replacement: $220 to $480
- Gas log set or burner deep clean: $150 to $250
- Chase cover fabrication and installation: $400 to $700
What moves the price most is parts availability and whether we’re repairing a single component or addressing a cascade of issues. A cracked firebox panel is often the visible symptom of a chase cover that’s been leaking for two years. We’ll always show you proof with photos before you spend a dollar. Estimates are free. Call (762) 225-2593 for an exact number on your Olympia unit.
Why Alpharetta Homeowners Call Kindling Chimney Alpharetta for Olympia Chimney Work
Danny Cortes and our technicians have been working on Olympia Chimney fireplaces in Alpharetta long enough to know which units were installed during the Windward building boom and what they look like 25 years later. We don’t patch problems we can correct, and we don’t recommend work you don’t need. Every repair is backed by the 365-Day Done Right Promise: if it’s not done right, we make it right. And because we also work with DuraFlex, HeatShield, and Gelco liners and parts, we can handle the full scope of what an Olympia fireplace repair sometimes requires. A live person answers our phone 24/7, background-checked technicians show up in uniform, and pet-safe products are used where there’s a choice. Where other companies compete on speed, we compete on being the crew you don’t have to watch from the window. A clean flue is a quiet house, and quiet is exactly what a family should hear on a cold night.
FAQs
Independent repair by a qualified technician does not automatically void an Olympia Chimney warranty, but using non-OEM parts in certain applications could affect warranty coverage on adjacent components. We’re honest about when the OEM part is worth the premium and when an equivalent aftermarket part does the same job for less. If your unit is still under warranty, we’ll flag which repairs should use OEM parts before we order anything.
Most common Olympia Chimney repair parts are available within one to two business days through our regional suppliers. Rare or discontinued parts for older Olympia units can take a week, and we’ll tell you if that’s the situation before you commit. Call (762) 225-2593 and we can check parts availability for your specific model while you’re on the phone.
If the firebox is structurally intact and the only issues are serviceable parts like the pilot assembly, damper, or burner, repair almost always makes more financial sense than a full replacement. Replacement becomes the honest recommendation when the firebox itself has rusted through or the chase has deteriorated to the point that repairing it would cost more than starting fresh. We’ll show you the evidence either way.
A failed damper lets conditioned air escape up the flue and can let smoke drift into the room when the fireplace is running, while cracked refractory panels expose the firebox’s outer shell to direct heat it wasn’t designed to handle continuously. Neither problem gets better on its own, but neither is a reason to panic tonight. Call (762) 225-2593 for a free estimate and an honest timeline for the fix.
We service the full range of Olympia Chimney wood-burning fireplaces, gas fireplaces, fireplace inserts, and the venting components that go with them. If we encounter an Olympia product we can’t safely repair, we’ll tell you that directly and point you to the right next step rather than experimenting on your fireplace. That’s the same standard we’d want for our own homes.
Written by Danny Cortes, Owner, Kindling Chimney Alpharetta at Kindling Chimney Alpharetta, serving Alpharetta and nearby areas.