Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Roswell
A standard chimney sweep in Roswell runs between $189 and $329 for a single flue with a standard fireplace and accessible roof. Most sweeps take 45 to 90 minutes, and we bring everything needed to leave your floors exactly as we found them. If you live off Alpharetta Highway, in the Historic District, or in a 1980s subdivision near East Cobb, we know the chimneys here and the specific ways they fail. Call (762) 225-2593 and a live person answers, any hour, any day.
Why Kindling Chimney Alpharetta Is Roswell’s Preferred Chimney Sweep Company
Roswell homeowners call us because we give a written price before the first brush goes up the flue, and that number doesn’t change at the door. Our Chimney Sweep team works in Roswell every week, from Canton Street’s storefront Victorians to the cul-de-sacs west of GA-400. Danny Cortes leads our crews, and every technician who steps onto a Roswell roof is background-checked, uniformed, and trained to follow the C.A.R.E. values on every visit.
The 365-Day Done Right Promise is simple: if the sweep isn’t done right, we make it right. No fine print, no runaround. That matters especially in Roswell, where so many fireplaces sit inside older masonry chimneys that haven’t been touched in decades. Our customers tell us the same thing over and over again: the price matched the quote, the crew wore shoe covers, and someone actually answered the phone when they called. Scheduling is coordinated from our Atlanta office, and crews serve Roswell locally, so we’re never far when you need us.
Styles & brands we work with
Fireplace Cleaning in Roswell
Fireplace Cleaning in Roswell means removing the soot, ash, and creosote that collect in the firebox, smoke shelf, damper, and the first few feet of flue behind it. Homes here run the gauntlet: a 1920s firebox off Canton Street behaves very differently from a zero-clearance unit in a 1990s subdivision. A standard fireplace cleaning in Roswell costs between $149 and $249, and we use pet-safe products where there’s a choice, because kids and animals sit right there on the rug while the fire burns.
Firebox and Smoke Chamber Care
We hand-brush the firebox, vacuum the smoke shelf, and inspect the damper while we work. In older Roswell homes, we often find the damper warped or rusted shut, which sends smoke into the room no matter how clean the flue is. We’ll tell you plainly if the damper needs replacement before you spend another dollar on sweeping.
Glass Door and Hearth Cleaning
For gas and wood units with glass fronts, we clean the interior glass with a non-abrasive product safe for the surface. We also vacuum the hearth, front and back. Drop cloths go down before we start, and we photograph the clean-up before we leave.
Chimney Services in Roswell
Chimney Services in Roswell covers the full sweep: top-down brushing of the flue liner, removal of creosote at every stage, and a visual check of the crown, cap, and exterior masonry from the roof. A routine single-flue sweep in Roswell runs $189 to $329 depending on roof pitch, flue height, and creosote stage. We stock professional-grade materials from HeatShield, Gelco, and Olympia Chimney, so if we find a problem during the sweep, we can often address it the same visit.
Creosote and Soot Removal
Roswell’s humid air and frequent shoulder-season fires produce creosote at every grade. First-degree creosote brushes off. Third-degree creosote is a hard tar glaze that requires chemical treatment or rotary removal. We quote that before we start, never after. You’ll know the number before we touch the chimney.
Annual and Level 1 Inspections
Every sweep includes a Level 1 inspection of the accessible flue and appliance. For Roswell homes with shared flues or older unlined masonry, we recommend a Level 2 inspection with a camera. That’s the only way to see what’s happening between the bricks before it becomes a problem you can smell or see.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Roswell
We work on every common chimney and fireplace brand found in Roswell homes, and we stock parts for HeatShield, Gelco, and Famco systems locally. That means when we find a cracked flue tile or a failed chase cover on a 1980s prefab unit, we don’t put you on a two-week parts wait. We quote the repair, order what we need, and schedule the return visit before we leave your driveway. You’re never left with an open chimney and a vague promise.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Roswell Homes
- Weeping bricks in pre-1940 chimneys. Roswell’s historic Craftsman and Victorian homes often have unlined masonry flues whose mortar joints have turned to sand. Moisture from our humid summers and winter freeze cycles pushes through the bricks, leaving white streaks and spalling faces. A sweep will catch this early; a liner replacement won’t.
- Shared and adjacent flues in attached historic homes. On Canton Street and in the surrounding Historic District, many rowhouses and duplexes share a chimney stack. If the unit next door hasn’t swept, their creosote is your creosote. We check what’s venting into the shared stack and flag cross-contamination risks a standard sweep misses.
- Third-degree creosote glaze in 1980s prefab units. The prefab chimneys common in Roswell’s postwar subdivisions run hot and fast, which bakes creosote into a hard glaze. Homeowners assume a brush will handle it, then find out too late they needed chemical removal. We test during the inspection and tell you the truth before we start.
- Roof access challenges on tight streets. Many Roswell blocks have overhead power lines, mature trees, and steep, tightly packed rooflines. Our techs check line clearances before placing a ladder, and we use roof-safe practices on slate and historic tile. A rushed roof job means cracked flashing and a leak you won’t see until spring.
Pricing for Chimney Sweep in Roswell, GA
A standard single-flue sweep in Roswell runs $189 to $329. Fireplace cleaning alone, without the full flue sweep, is $149 to $249. A Level 2 camera inspection, which we recommend for any Roswell home with an unlined or shared flue, typically adds $150 to $250 to the visit. If we find third-degree creosote needing chemical removal, that’s quoted before we start. The number on the quote is the number on the bill. Call (762) 225-2593 and we’ll give you a free estimate over the phone, with no pressure to book on the spot.
We Also Serve Cities Near Roswell
Our crews serve the surrounding metro from the same dispatch team, so if you’re in Alpharetta, Holly Springs, Duluth, or Acworth, you get the same written-price promise and the same care standards. Roswell is our home base for this side of the metro, and we’re in the area every week.
Serving Roswell, GA - Our Local Coverage Area
We’re based in the Roswell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Roswell
A standard sweep removes creosote from whatever flue passage exists, but sweeping an unlined chimney does nothing to stop the moisture intrusion already breaking down your mortar. In Roswell’s pre-1940 homes, we routinely see bricks that have wept through so badly the structure itself is compromised. The sweep comes first to get eyes and a camera into the flue, then we recommend a stainless steel liner, often HeatShield, before you light another fire. Call (762) 225-2593 and we’ll walk you through what your specific chimney needs.
Roswell’s humid subtropical climate pushes moisture into porous masonry all summer, and winter freeze cycles expand that water inside the bricks. The result is spalling faces, cracked flue tiles, and creosote that cakes harder and faster than in drier climates. A chimney swept in spring can develop problematic creosote by February simply because of how fires burn in our damp, cold snaps. Ask us about our annual sweep schedule when you call (762) 225-2593.
Each unit is responsible for its own flue passage, but the shared stack means your neighbor’s neglect becomes your fire risk. If the adjacent unit hasn’t swept and the flue liners are compromised, creosote from their fires can build in the shared masonry and ignite. We inspect shared flues with a camera and tell you exactly where one unit’s buildup ends and the other’s begins. Book a Level 2 inspection by calling (762) 225-2593.
Third-degree creosote is a hard, tar-like glaze that forms when fires burn hot and fast through a flue that isn’t being swept regularly, then cool and reheat through humid seasons. Roswell’s older masonry chimneys, especially those without proper liners, are prone to it because the flue walls stay cooler than the fire, condensing vapors into glaze. It’s not brushable. It requires rotary or chemical removal, and we quote that before we start. Call (762) 225-2593 for an exact price on your flue.
Not necessarily every year, but at least once before you light anything, and certainly before you buy a home with an existing masonry chimney. Chimneys in Roswell fail from moisture and time even without fires. A Level 1 inspection during our sweep catches the early signs. If you’ve never burned and the chimney has sat unused for years, a Level 2 camera inspection is the honest first step. Estimates are free at (762) 225-2593.
Written by Danny Cortes, Owner at Kindling Chimney Alpharetta, serving Roswell and the surrounding metro since the Cedarwell family of companies was established in 2003.